Directly from the owners, energy-efficient house in the finishing stage. We built the house for ourselves, but plans changed. We designed the project from scratch, focusing on optimizing the layout of the rooms and low energy demand based on solutions from passive houses. Ground floor 156m2 - living room with dining area - 48m2 with a raised ceiling (over 3m) - closed kitchen with the possibility of opening it to the living room - room (guest/office) - bathroom - vestibule - large boiler room that can be a utility room - utility room (can also be an office/gym/studio or a room with an individual bathroom) - spacious garage for 2 cars. First floor 78m2 - 1 x bedroom with individual bathroom - 2 x bedrooms - bathroom - laundry room. Attic 35m2 - comfortable storage room (over 2.2 m at the ridge). Standard, equipment - Nibe heat pump with an above-standard additional tank, underfloor heating throughout the house (also in the garage), water installation with circulation - Spiro recuperation distributed to the garage - external installation for the installation of an additional ground heat exchanger - installation for a "stove" type fireplace in the living room - gas on the way as an alternative heating option for the house - gravity sewage system, i.e. without a pump - water softener - monitoring - alarm system installation - audio installation in the living room - installation for controlling curtains or external blinds - thermal insulation: graphite EPS 0.033 - 20cm, installation of perimeter plates (on glue and foam), attic insulation PUR foam 0.034 - 30cm + 10cm; - first layer of blocks - thermal insulation - triple-glazed windows, external doors, and garage door with a raised thermal insulation coefficient. Tight installation - on tapes, joinery partially extended into the insulation layer, "warm window sills" and the base under the terrace window - high internal doors on the ground floor (lintel aligned with the ceiling) - large glazing, e.g. panoramic windows, HS doors 2.6x6m divided into 3 segments of 2m - floor made of Barlinek layered board - oak - walls and ceilings (partially plastered) - electrical installation + "passive" boxes for sockets and LED strips in the corridors - intercom installation - wired internet installation - installation for a car charger - abysinnian well for watering the garden with an external installation - large format tiles Monolith (including 120x240 cm) - bathrooms: complete Deante fittings and furnished - glued oak window sills - foundations with reinforced waterproof insulation - air-tight seals - grouted block joints. Roof - prefabricated trusses - on the sloping part, panel tiles Ruukki Hyygge with an extended 50-year warranty - on the flat part, welding felt - passive stairs to the attic (Heyke) - open diffusion vapor barrier - lightning protection installation brought to the roof hidden in the insulation layer (mineral wool), perimeter lightning protection. Elevation - base for structural plaster - Ruukki Hyygge metal window sills with a 50-year warranty. Area - terrace, driveway, and sidewalks made of large format gres 60x60cm partially laid, and in the remaining part, the base is prepared for laying gres - rainwater drainage into the ground - access via a private road - panel fencing completed by 80%. Since the house is in the finishing stage, some changes can still be made. Floor and bathrooms to be completed. Location - 700 meters to the center of Osielsko, i.e. shops, school, church - in the area new houses.

Specifications:
Area: 234.0 m²
Bedrooms: 5
Floor: 1
Built: 2025

Additional Features:
Attic: True
Kitchen Type: closed

Seller: Radek

Data source: https://www.otodom.pl/pl/oferta/nowy-energooszczedny-dom-do-wykonczenia-nowa-cena-ID4wVhn